ไทย
รายละเอียดเพิ่มเติม
ANSER Specifications
| Club | Loft | Length | Offset | Lie | Bounce | Swing Weight | RH/LH | STOCK ORDER |
|---|---|---|---|---|---|---|---|---|
| 3 | 20.00° | 38.75″ | 0.21″ | 59.25° | 3.0° | D1 | RH/LH | Limited Stock |
| 4 | 23.00° | 38.25″ | 0.18″ | 60.00° | 4.0° | D1 | RH/LH | Limited Stock |
| 5 | 26.00° | 37.75″ | 0.15″ | 60.75° | 5.0° | D1 | RH/LH | Limited Stock |
| 6 | 29.00° | 37.25″ | 0.12″ | 61.50° | 6.0° | D1 | RH/LH | Limited Stock |
| 7 | 32.50° | 36.75″ | 0.10″ | 62.25° | 7.0° | D1 | RH/LH | Limited Stock |
| 8 | 36.50° | 36.25″ | 0.07″ | 63.00° | 8.0° | D1 | RH/LH | Limited Stock |
| 9 | 40.50° | 35.75″ | 0.06″ | 63.75° | 9.0° | D1 | RH/LH | Limited Stock |
| PW | 45.00° | 35.50″ | 0.04″ | 64.00° | 11.0° | D3 | RH/LH | Limited Stock |
These are design specifications that may vary due to manufacturing tolerances.
Lie angle based on Black Color Code at standard length.
Standard swing weights for graphite shafts are 1 point lighter than standard swing weights for steel shafts shown above.
SHAFT
SHAFT
| SHAFT | FLEX | TORQUE | WEIGHT | LAUNCH ANGLE | STOCK ORDER |
|---|---|---|---|---|---|
N.S.PRO 950GH
|
Regular | 2.0° | 95g | Mid | Limited Special Order |
| Stiff | 1.9° | 98g | Mid | Limited Special Order | |
TFC 800i
|
Regular | 4.7° | 49g | High | Limited Stock |
| Stiff | 4.5° | 53g | Mid | Limited Stock | |
CFS
|
Regular | 2.1° | 99g | High | Limited Special Order |
| Stiff | 1.8° | 109g | Mid | Limited Special Order |
| PING offers a variety of shaft flexes in steel and graphite to meet every golfer’s needs and preferences. Selecting the proper shaft flex for your swing will help you get the most distance and accuracy from every shot. Generally, players with faster swing speeds require stiffer shafts to keep the ball trajectory lower, while players with slower swing speeds will require more flexible shafts to produce a higher ball trajectory. The choice of steel or graphite shafts is usually based on preferences for weight and/or feel. Players seeking a lighter overall weight and/or a softer feel in their irons may prefer graphite shafts, while players who prefer a standard weight club with a firmer feel may prefer steel shafts. |
|
GRIP
| GRIP | COLOR CODE | DESCRIPTION |
|---|---|---|
360 ID8
|
 |
The 360 ID8 grip utilizes all the same features as the ID8, but is a round grip to function with the adjustable technology of the Anser family. |
360 ID8 Full Cord
|
 |
The 360 ID8 Full Cord is a round grip designed to function with drivers and fairway woods featuring PING’s adjustable loft technology. It features a firmer texture in the upper portion to help control direction, a softer texture in the lower portion for enhanced feel, and soft cord to enhance traction. |
| PING offers a variety of grip sizes and styles to fit different hand sizes and texture preferences. Since grip size influences your wrist action, and therefore the direction of your shots, it is commonly used by fitters to affect ball flight. PING color-coded grips are available in six different diameters, and can be further customized with grip tape according to your needs. Once the neutral grip color code has been determined based on hand measurements, golfers may consider smaller diameter grips to help control fades and slices, or larger diameter grips to help control draws and hooks. |
|
Consistent ball flights are created by the Anser’s progressive stabilizing bar technology. Stabilizing bars in the back cavity out wider and are thinner in the long irons to locate the CG low for higher ball speed and initial launch angle. These bars get more vertical and are thickest in the short irons for penetrating ball flights with optimal spin. The bars also support the streamlined face design to help increase ball velocity for greater distance – especially in the longer irons.
This progressive set design features larger heads and more offset in the longer irons and progressively smaller heads with less offset through the short irons. The multi-material design features a soft 8620 steel body with a dense tungsten sole weight and a hollow cavity section that optimizes the CG and maximizes MOI.
